| 24-0160 | SRPM Rubber Products | 10/28/16 |
| Headlight Pads | ||
| Part # | Description | Price |
| 24-0099 | 1931 Plymouth PA Headlight Pads 1 7/8" x 3 1/4" (Pair) | $29.95 |
| 24-0109 | 1931 Dodge Headlight Bracket Pads. 4" wide X 5-1/8" long (Pair) | $33.95 |
| 24-0082 | 1932 Plymouth PB Headlight Pads 1 7/8"wide x 5 1/8"long (Pair) | $34.95 |
| 24-0064 | 1933 Plymouth Headlight Pads. 2-3/8" wide X 5-5/8" long (Pair) | $33.95- |
| 24-0071 | 1933 Plymouth Headlight Pads 1-7/8" wide x 4-5/8" long (Pair) | $29.95 |
| 24-0102 | 1933 Plymouth Headlight Pads 4 5/8" x 2 1/4" (Pair) | $23.75 |
| 24-0073 | 1933 Dodge Headlight Bracket Pad 2-3/4" wide X 4-1/2" long (Pair) | $32.00 |
| 24-0182 | 1933 Dodge Headlight Bar Pads - 2" wide X 4-1/4" long (Pair) | $22.00 |
| 24-0166 | 1933-34 Plymouth & Dodge Cars and Trucks Chopped Headlight Stand Pads (Pair) | $25.00 |
| 24-0008 | 1934 Plymouth Headlight Pad 2-5/8" X 6-1/2" (Pair) | $32.95 |
| 24-0087 | 1934 Dodge Headlight Pads 2-7/8" x 6-1/2" (Pair) | $26.25 |
| 24-0089 | 1934 Dodge Headlight Bracket Pad 2 1/8" x 4 1/2" (Pair) | $24.65 |
| 24-0002 | 1935 Plymouth Headlight pad 2-7/8 x 8-5/8 (Pair) | $35.00 |
| 24-0090 | 1935 Dodge Lower Headlight Pads 2 7/8" x 6 1/2" (Pair) | $28.00 |
| 24-0091 | 1935 Dodge Headlight Pads 2 3/4" x 5 1/2" (Pair) | $24.65 |
| 24-0068 | 1935-36 Dodge Thick Mounting Base between the Headlight Bucket and Stand (Pair) | $38.50 |
| 24-0054 | 1936 Dodge Car & 1936-38 Dodge Truck & 1937-38 Plymouth Truck Headlight Base to Grill Pads. 4" wide X 7-1/4" long. (Pair R&L) | $25.95 |
| 24-0032 | 1936 Dodge Sedan & 1936-38 Dodge Truck & 1937-38 Plymouth Truck Headlight to Bracket Pad without Steel Core (Pair) | $74.00 |
| 24-0001 | 1936 Plymouth Headlight Pads. 2 5/8" wide X 6 1/2" long (Pair) | $45.00 |
| 24-0190 | 1937 Dodge Car Headlight Pad - Bracket to Radiator Shell or Side of Shroud (3-1/4 inch wide by 13-1/8 inch long) (There are several types of these pads in 1937 - Check dimensions with your original) - (Pair) | $49.95 |
| 24-0146 | 1939-40 Dodge & 1939-41 Plymouth 1/2 Ton Truck Headlight Pads. 3 1/4" Wide x 5 1/4" Long. Right and Left (Pair) | $24.95 |
| 24-0107 | Headlight Cowl Pads, 5 3/8" X 9 7/8" Long (Pair) | $38.99 |
| Tail Light Pads | ||
| 24-0053 | 1933 Plymouth Tail Light Pads 2 1/2" x 4 3/4" (Pair) | $25.00 |
| 24-0069 | 1933 Plymouth/Dodge Tail Light Stand Rubber 2 1/4" wide x 4 1/4" long (Pair) | $24.50 |
| 24-0104 | 1934-35 Plymouth Tail Light Pads 2 3/4" wide X 5 1/8 long (Pair) | $21.00 |
| 24-0072 | 1934 Dodge Tail Light Pads 2 5/8" wide x 5" long (Pair) | $24.95 |
| 24-0088 | 1934 Dodge Tail Light Pads 2 1/2" x 4 1/8" (Pair) | $24.95 |
| 24-0094 | 1935 Dodge Tail Light Pads 2 5/8" x 6" (Pair) | $26.25 |
| 24-0095 | 1935 Dodge Tail Light Pads 2 7/8" x 6 1/2" (Pair) | $22.95 |
| 24-0070 | 1936 Dodge Tail Light Pad (Pair) | $24.50 |
| 24-0105 | 1937 & 38 Plymouth Business Coupe & Deluxe Tail-light Pads 2-1/8" Wide x 4-3/8" Long (Pair) | $25.50 |
| Seals | ||
| 24-0134 | 1933-34 Plymouth Windshield Post Pad (Each) | $14.95 |
| 24-0164 | 1933-34 Plymouth & Dodge Windshield Weatherstrip - Mitered Corners (One Piece) | $69.95 |
| 24-0165 | 1933-34 Plymouth & Dodge Windshield Weatherstrip - 12 foot Length | $65.00 |
| 14-0004 | 1933-34 Plymouth and Dodge Windshield Outer edge Rubber Used on Roll out Style Frames. | $72.50 |
| 24-0018 | 1935-46 Chrysler, 32-35 Packard, 33 Studebaker Swing-Out Windshield Rubber - Per foot | $7.25 |
| 24-0022 | 1935 Chrysler Products Quarter and Rear Window Rubber 7/8" Tall 5/8" Wide (Sold per Foot) | $5.25 |
| 24-0153 | 1935-46 Weatherstrip for most swingout windshields for peremeter of glass approx. 11 foot strip Fits many WPC cars & trucks especially 35-39 Dodge, Plymouths and pickup trucks. | $79.95 |
| 24-0051 | 1936 Plymouth Rear Window Seal Custom 8 Feet | $35.00 |
| 24-0155 | 1936 Dodge & Desoto Windshield Rubber. One piece | $106.50 |
| 24-0157 | 1937-42 Dodge/Plymouth Car Windshield Center Bar Gasket - 20" (Each) | $22.95 |
| 24-0021 | 1937-39 Vent Window Weatherstrip Fits 1937 Chrysler C14,C15, C16, Desoto S3 Dodge D5, PLY P3,P4 1938 Chrysler C18,C19, C20, Desoto S5, Dodge D8, Plymouth P5,P61939 Chrysler C22, C23, Dodge D11S | $179.00 |
| 24-0176 | Front Window Vent Window, Division Post Weatherstrip 30" long "L" Style requires attaching with adhesive to post. Use on 37-61 Mopars and some other models & makes. | $24.95 |
| 24-0151 | 1937-38 Plymouth/Dodge Coupe Rear Window Vulcanized Channel Rubber Seal | $140.00 |
| 24-0152 | 1937-38 Plymouth/Dodge/Desota/Chrysler Sedans Rear Window Vulcanized Rubber Seal | $164.95 |
| 24-0079 | 1938 Plymouth & Dodge vulcanized windshield rubber without reveal molding | $120.00 |
| 24-0150 | 1938 Plymouth & Dodge vulcanized windshield rubber with reveal molding | $120.00 |
| 14-1513 | 1939-47 Dodge & 1939-41 Plymouth Truck Outer Windshield Frame Seal | $74.50 |
| 14-1501 | 1939-47 Dodge & 1939-41 Plymouth Truck Rear Window Rubber | $25.00 |
| 14-1503 | 1939-47 Dodge & 1939-41 Plymouth Truck Door Window Sweep (Pair) | $40.00 |
| 24-0123 | Windshield (1938-1950 non-opening windshields without Chrome Reveal) and Rear Window Seal, Front and Rear and some Quarter Windows uses - With Lip (Per Foot) | $5.20 |
| 24-0117 | Windshield, Rear Window & Quarter Window Rubber Seal - With Lip (Per Ft) | $5.20 |
| 24-0193 | Windshield and Rear Window Channel - Used with 1/4" glass - No Lip (Per Ft) | $6.25 |
| 24-0189 | 1940-48 Chrysler, Desoto, Dodge & Plymouth P10 (except Convertible) Windshield Gasket (Mounts around the full perimeter of the front glass and has the divider bar molded directly into it) | $199.95 |
| 24-0019 | Window Felt 5/8" wide 1/4" inside 8 feet long and 17/32 tall (Each) | $37.00 |
| 24-0034 | Window Felt 7/16" Tall X 15/64th Wide. Comes in 8 FT. Strips Stainless Steel Edge (Each) | $42.00 |
| 24-0035 | 3M Super Weatherstrip and Gasket Adhesive - 5 fl oz (Black) | $12.99 |
| 24-0047 | 5 feet - "L" Channel Rubber Window Sweep with Adhesive Backing | $15.00 |
| 24-0048 | 10 feet - "L" Channel Rubber Window Sweep with Adhesive Backing | $28.00 |
| 24-0148 | 15 feet - "L" Channel Rubber Window Sweep with Adhesive Backing | $37.95 |
| 24-0149 | 20 feet - "L" Channel Rubber Window Sweep with Adhesive Backing | $49.95 |
| 24-0168 | Roof Insert Seal. Top Insert filler seal for closed cars. Fits between cloth top-center panel and surrounding steel (Per foot) | $6.50 |
| 14-0005 | Windshield Inner Glass Seal for 1/4" Clear Glass (Sold per Foot) (Uses 10 feet per Windshield) | $2.50 |
| 14-0006 | Windshield Inner Glass Seal for 1/4" Tinted Glass (Sold per Foot) (Uses 10 feet per Windshield) | $2.50 |
| 14-0007 | Door Glass U Channel Inner Seal For 3/8" Glass (Sold per Foot) | $2.50 |
| 14-0008 | Door Glass U Channel Inner Seal for 1/4" Glass (Sold per Foot) | $3.00 |
| Extrusions | ||
| 24-0036 | 15 feet Door seal 1/2" x 5/8" Sponge Universal Extrusion Rain Protection Edge | $45.00 |
| 24-0052 | 20 feet Door Seal 1/2" x 5/8 "Sponge Universal Extrusion Rain Protection Edge | $62.00 |
| 24-0045 | Hood and Cowl Extrusion Sponge Strip with adhesive backing 3/8W"x 1/4" Tall (per Foot) | $2.40 |
| 24-0027 | Hood and Cowl Shell & Door Seal Extrusion 15 feet Sponge w/strip w/adhesive backing - 5/8" W x 3/8" Tall | $45.95 |
| 24-0046A | Door Extrusion 5 feet Sponge w/strip w/adhesive backing 3/8W"x 3/8" Tall | $12.50 |
| 24-0046 | Door Extrusion Sponge Strip with adhesive backing 3/8W"x 1/4" Tall (per Foot) | $2.40 |
| 24-0026 | Door Extrusion 20 feet Sponge Univ. w/strip 5/8W X 3/8 Tall (Chrysler Products req 10' per door) | $62.00 |
| 24-0029 | Hood and Cowl Universal Sponge Seal, for Cars needing 5 feet. 5/8" W x 3/8" Tall | $19.50 |
| 24-0028 | 35-38 Chrysler Hood Sponge Seal for Cars with Steel Hoods 5/8"W x 3/8" Tall- 10 ft | $39.50 |
| 24-0024 | Trunk Rubber Extrusion 10 feet 7/8" Tall 1/2" | $25.95 |
| 24-0025 | Trunk Rubber Extrusion 15 feet - Coupes and Sedan Trunks | $35.00 |
| 24-0121 | Hood Lacing, Universal Brown Fabric, 13/16 inch wide, Fits most 28-39 Domestic Vehicles. Like Original with two Humps and Center Flat (Sold per Foot) (Rivets Available) | $4.50 |
| 24-0122 | Hood Lacing, Universal all Rubber 3/4" wide fits most 28-39 Domestic Vehicles. Like Original two Humps & Center Flat (Per Ft) | $3.95 |
| 24-0004 | Hood Lacing Split Rivets (Each) (Needs 1 Rivet for every 4 inches) | $0.15 |
| Cowl Vents | ||
| 24-0178 | 1932-33 Chrysler/Dodge/Plymouth Cowl Vent Gasket - High grade sponge for twin cowl vents of 34" circumference- 11/16" x 3/4" wide material (Pair) | $55.00 |
| 24-0013 | 1933 and some 34 Plymouth Cowl Vent Gasket 2-3/4"x16-1/4" Each | $29.95 |
| 24-0014 | 1934-39 Plymouth Cowl Vent - Rectangular 3-3/4" x 15-1/2" x 3/8" thick, Also may fit other Mopar Cars & Trucks (Each) | $29.95 |
| 24-0057A | 1934-39 Mopar, Gasket Cowl Vent, rubber 16-1/2" long X 6" wide in center and 4" wide on sides (Each) | $53.95 |
| 24-0057 | 1936 Chrysler C7, C8 Convertible, Plymouth P1, P2, 1937 Chrysler C14,15, 16, Desoto S3, Dodge D5, Plymouth P3, P4, 1938 Chrysler C18 ,20, Desoto S5, Dodge D8, Plymouth P5, P6 - Cowl Vent Seal (Each) | $53.95 |
| 24-0145 | 1939-48 Dodge/40-48 Plymouth Cowl Vent Seal, 4" Wide x 18" Long (Each) | $29.95 |
| 14-1486 | 1939-47 Dodge Truck & 1939-41 Plymouth Truck Cowl Vent Seal (Each) | $29.95 |
| Fender Welt - Body Rubber | ||
| 24-0062 | Body To frame, Grill support, Bed to Frame Rubber, 1/8" Thick 2" wide (Per Foot) | $3.50 |
| 24-0017 | Black Fender Welt 25 Feet | $39.00 |
| Door & Handle Pads & Related Rubber Parts | ||
| 14-1324 | 1928-37 Deck & Rumble Seat Handle Pad (Each) | $5.99 |
| 24-0133 | 1930-39 Mopar car, Door/Trunk Handle Pad 2-3/8" x 1-3/8" (Each) | $15.50 |
| 24-0111 | 1931 Dodge Door Handle Pads. 1-3/8" wide X 2-5/8" long (Pair) | $14.95 |
| 24-0115 | 1932 Dodge Door Handle Pads. 1-1/2" wide X 2-5/8" long (Pair) | $14.95 |
| 24-0106 | 1932 Plymouth PB Door Handle Pads. 1-3/4" wide X 2-1/2" long (Pair) | $17.50 |
| 24-0061 | 1933 Plymouth Trunk Handle Pad (Each) | $8.99 |
| 24-0011 | 1933-35 Mopar Door Handle Pads 1 5/8" wide X 3 1/2" long (Pair) | $21.95 |
| 24-0119 | 1933 Plymouth Door Handle Pads 1 1/2" x 2 1/2" (Pair) | $14.95 |
| 24-0187 | 1935-36 Chrysler/Dodge/Plymouth Door Handle Pad - 1-5/16" Wide - 2-7/16" Long (Pair) | $25.00 |
| 24-0076 | 1935-38 Plymouth Door Handle Pads 1 1/4 W X 2 1/2 " Long (Pair) | $14.00 |
| 24-0120 | 1937 Plymouth Door Handle Pads. 1-1/4" wide X 2-7/8" long (Pair) | $16.75 |
| 24-0172 | 1937 Dodge & Plymouth Cars & Trucks Side Window Bumper - Anti-rattle (5/16" x 1" - For 3/16" by 3/4" slot in sheet metal (Each) | $6.00 |
| 24-0194 | 1937-39 Dodge Door Side Bumper (Length 1.4375" x Width 0.6875") (Each) | $13.50 |
| 24-0127 | 1938 Plymouth 4DR Sedan P6 Door Handle Pads 2-3/4"x1-1/4" Each | $8.50 |
| 14-1511 | 1939-41 Plymouth Truck & 39-47 Dodge 1/2 ton Truck Outer Door Handle Seal (Pair) | $12.00 |
| 24-0037 | Trunk Handle Pads 1-1/2" wide x 2-1/4" long (Pair) | $17.99 |
| 24-0056 | MOPAR Hood Corners, Fits Flat Corners. 80 degree angle, 1/4 " to 3/8 "corner radius. 1 3/8" wide (Pair) | $8.99 |
| 24-0009 | Door Bumper 1" diameter X 1/4" thick Round (Each) | $5.95 |
| 24-0147 | Door Bumper 1" high X 1-1/8" wide X 1/2" thick (Each) | $6.95 |
| 24-0010 | 1933-37 Plymouth and Dodge Door Jam Bumper. Perfect reproduction. 1 1/16" high X 1 1/4"wide X7/16" thick. (Each) | $6.99 |
| Grommets | ||
| 24-0063 | 1933-34 Plymouth, Dodge, Chrysler Rear Bumper Grommet - 3-3/4" Outside Length by 2-1/4" Outside Width by 1-3/4" Inside Hole Length by 1/2" Inside Hole Width by 1-9/16" Height (Pair) | $105.00 |
| 24-0065 | 1933 Plymouth Gas Filler Neck Grommet (Each) | $52.95 |
| 24-0167 | 1934 Mopar Coupes Fuel Neck Grommet 2-3/16" ID x 4-5/16" OD x 3/8" thick. Perfect Copy. Height 4-5/16". May also fit other Chrysler, Desoto and Dodge Cars | $45.00 |
| 24-0186 | 1935 Plymouth/Dodge Coupe/Sedan Fuel Grommet - Oblong shape, fully molded rubber. 4-1/4" outside width by 5-5/8" outside length by 7/8" height. 2-1/16" top hole width | $60.00 |
| 24-0074 | 1935 Plymout/Dodge Coupe/Sedan Fuel Filler Grommet. Fully molded rubber, slightly angled. 4-1/2" outside width by 4-5/8" outside length by 2-1/4" inside hole diameter | $50.00 |
| 24-0033 | 1935-37 Bumper Grommet, Front and Rear are the same. RH/LH 3-13/16 Tall (Pair) | $110.00 |
| 24-0126 | 1935 Plymouth & Dodge Front Bumper Grommet - 3-3/4" Round - Also fits 35 Dodge DU (Pair) | $67.00 |
| 24-0075 | 1936 Plymouth/Dodge Front & Rear Bumper Grommet (Pair) | $110.00 |
| 24-0081 | 1936-37 Chrysler, Dodge Front and Rear Bumper Arm Grommets 5" wide x 3-5/8" long, with 1-3/16" long inner slot (Pair) | $32.00 |
| 24-0118 | 1936-49 Gromment, Fuel Filler Neck 2-1/8" Inner Diameter (Each) | $55.00 |
| 24-0158 | 1937-38 Dodge & Plymouth Front Bumper Arm Grommets. Hollow construction. 2-3/4" wide X 4-1/4" long, with 1-7/8" long inner slot. (Pair) | $38.00 |
| 24-0159 | 1937-38 Dodge & Plymouth Rear Bumper Arm Grommets. Hollow Construction 4 1/4" W X 4 1/2" Long with 1/2" wide inner slot. (Pair) | $38.00 |
| 14-1422 | Gas Tank Grommet 1939-47 Dodge Truck & 39-41 Plymouth Truck (Each) | $19.95 |
| 14-1385 | Universal Grommet fits 2" to 2-1/2" Gas Tank Filler (Each) | $6.00 |
| 24-0144 | Gas Filler Grommet - 2-3/4" I.D. - 4-1/2" Oblong Length (Known to fit Dodge Trucks 1937-38. May fit 37-38 Plymouth Truck P-50) (Each) | $35.00 |
| Miscellaneous Rubber | ||
| 24-0100 | 1931 Plymouth PA Gear Shift Pad 7-7/8" x 7-7/8" (Each) | $47.25 |
| 24-0101 | 1924-34 Dodge and Plymouth Cars & Trucks Clutch and Brake Pedal Pads (Pair) | $26.75 |
| 24-0097 | 1936 Dodge Horn Vent Pad 5-3/8" x 16-3/4" (Each) | $29.95 |
| 14-1631 | 1939-47 Dodge & 1939-41 Plymouth Truck Hood Prop Bumper with brackets (Pair) | $29.95 |
| 24-0085 | Rumble Seat Step Plate Pad 4-1/4" Ea. No Logo (Each) | $20.05 |
| 24-0083 | Rumble Seat Step Plate Pad 4-1/4" Script "P" (Each) | $20.05 |
| 24-0135 | Accessory Floor Mat -made of high quality black rubber with molded "Plymouth" original emblem. Also designed to be sewn into new carpets 12" X 17 " long (Each) | $29.95 |
This item is also in the following categories:
